Fire-Lite MS-9050UD Manual page 117

Master Programming Level
The ANN-RLY module provides ten Form-C relays which can be programmed for various func-
tions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will display the
remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option screen,
press the number key corresponding to the relay to be programmed. Following is a list of the avail-
able programming options for each relay:
• Alarm
• Supervisory
• Supervisory AR
• Trouble
• Comm Fail
• Process Mon
• Process Mon AR
• AC Loss
• Hazard
• Medical
• Silenceable Alarm
• Zone Active XX (where XX = programmed zone 00 to 19)
Auto-Configure

The ANN-BUS Auto-Configure features allows the programmer to quickly bring all installed
ANN-BUS modules online. The software will search for all ANN-BUS modules and automatically
program the device type and address into the system. The ANN-BUS must be enabled for the Auto-
Configure feature to work. Pressing 3 while viewing ANN-BUS Screen #1 will begin the Auto-
Configure process and cause the following screen to be displayed:
MS-9050 Series Manual — P/N 52413:F 10/22/2010
ANN-BUS
AUTO-CONGFIGURE
IN PROGRESS
PLEASE WAIT
Auto-Configure Screen
Programming
117