Set Of Gauges - Duerkopp Adler 195 Service Manual

1.2

Set of Gauges

1
5
9
Gauge
1 - Gauge
2 - Gauge
3 - Timing pin (in the
enclosed package)
4 - Dial Gauge
5 - Gauge
6 - Gauge
7 - Gauge
8 - Gauge (in the
enclosed package)
9 - Gauge
10 - Gauge
11 - Adjustment plate
12 - Oil dip stick
13 - Gauge
2
6
10
The adjustment gauges listed as follows make a precise setting and
testing of the machine possible.
The timing pin no. 3 is included in the package accompanying every
machine. It allows the handwheel positions A to F necessary for
settings to be locked in.
Order no.
195 002962
195 002966
791 001152
171 000981
171 000975
933 080192
933 000740
933 000758
491 079997
491 079996
195 002980
965 000871
195 002988
3
7
11
Setting
- Setting the left lower shaft bearing
(optionally also 933 735 + 2 mm)
- Setting the hook drive housing
(optionally also 933 739K + 2,5 mm)
- Arresting the handwheel in one of the positions A to F
- For measuring the needle avoidance movement
of the hook drive.
- Inclining the hook to 89° 30'
- Equidistant symmetry of looper motion
- Height of the thread take-up disc
- Thrust eccentric for the transporter
- 0-setting of the upper stitch actuator
- Stroke adjustment range of the pressure feet
- Stitch length limitation in the adjustment wheels.
- Checking the oil level in the hook drive housing
- Setting gauge for the thread trimmer
(Cutting trial out of the machine)
4
12
8
13
7