Dual AXXERA X2DMA500 Installation & Owner's Manual page 22

Table of Contents

Advertisement

USB/SD Card Operation
Connect a USB Device
(sold separately)
Connect an SD Card
(sold separately)
Playing Music
Track Select
Fast Forward and
Folder Access
X2DMA500
To play MP3/WMA/AAC files from most mass storage
devices, connect a device to one of the X2DMA500's two
USB ports (front or rear).
To play MP3/WMA/AAC files from an SD Card, insert an
SD card into the X2DMA500's SD card slot, located below
the tuning knob. Insert the SD card with the label facing up,
and press the card until it clicks into place. Remove the SD
card by pressing in until it clicks, then pull to remove.
When a USB or SD card device is first connected, playback
will begin momentarily. Depending on the number of files and
folders, it may take several seconds for the device to begin
playing. If no valid MP3/WMA/AAC files are detected, "NO
FILE" will be displayed and the last mode will be resumed.
Rotate tuning knob right to skip to the beginning of the next
track. Rotate tuning knob left to return to the beginning of
the current track. Rotating tuning knob left again skips to
the beginning of the previous track.
Press and hold TRACK
Reverse
control to fast forward or reverse a track.
Pause
Press
Press
Press
Press
Note: Folder access is only available on USB/SD Card
devices with more than one folder.
Repeat
Press RPT to enter the Repeat menu, then turn the tuning
knob to select one of the following options:
• ALL SONGS - Plays all tracks on the USB/SD Card device.
• CURRENT SONG - Continuously repeats selected track.
• CURRENT FOLDER - Continuously repeats all files in
selected folder.
Random
Press RDM to enter the Random menu, then turn the
tuning knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL SONGS - Plays all tracks in random order.
• CURRENT FOLDER - Plays all tracks in folder in random
order.
Note: Random mode is retained in memory when selecting
between other modes and when the unit is turned on/off.
Intro
Press INT to enter the Intro menu, then turn the tuning
knob to select one of the following options:
• OFF - Cancels the INT function.
• ALL SONGS - Plays first 10 seconds of each track.
• CURRENT FOLDER - Plays first 10 seconds of each track
in folder.
ll
l
/ II to temporarily stop USB playback.
l
/ II again to resume playback.
to select the previous folder.
to select the next folder.
22
nn
or TRACK
on the remote

Advertisement

Table of Contents
loading

Table of Contents