Replacing Fuse; Wiring Diagram - Dual XDMA5280 Installation & Owner's Manual

Wiring Diagram
BLUE
BLACK
RED
10 AMP
AGC Fuse
YELLOW
Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
XDMA5280 INSTALLATION
Rear Preamp Output
Connect to amplifier RCA input
Antenna Connector
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
Ground
Connect to vehicle
chassis ground.
Accessory
Connect to ignition
circuit or switched 12 volt source.
Memory
Connect to battery
circuit or constant 12 volt source.
Right Rear
Violet/Black (-)
Violet (+)
Left Rear
Green/Black (-)
Green (+)
RCA Cable
(sold separately)
AMP
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The XDMA5280 uses
one 10 amp ATM fuse
located beside the wiring
connector.
3