Replacing Fuse; Wiring Diagram - Dual XD5250 Installation & Owner's Manual

Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
* Caution - Do not attach any speaker leads to ground as severe damage will occur.
Rear Preamp Output
Connect to amplifier RCA input
Antenna Connector
BLUE Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
BLACK Ground
Connect to vehicle
chassis ground.
RED Accessory
Connect to ignition
circuit or switched 12 volt source.
5 AMP
AGC Fuse
YELLOW Memory
Connect to battery
circuit or constant 12 volt source.
Right Rear
Violet/Black (-)
Violet (+)
Left Rear
Green/Black (-)
Green (+)
XD5250 INSTALLATION
Wiring Diagram
RCA Cable
(sold separately)
AMP
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD5250 uses one 5 amp
AGC fuse located in-line.
3