To Stop The Engine; To Start The Engine - Triumph Daytona 675 Owner's Handbook Manual

How t o Ride the Motorcycle

To Stop the Engine

I
1 Engine stop switch
2 Starter button
3 Neutral indicator light
4 On position
5 Ignition switch
Close the throttle completely.
Select neutral.
Turn the ignition switch off.
Support the motorcycle on
level surface with the side stand.
Lock the steering.
The engine should normally be
stopped by turning the ignition
switch to the off position. The
engine stop switch
emergency use only. Do not leave
the ignition switched on with the
engine stopped. Electrical damage
may result.

To Start the Engine

Check that the engine stop switch is
in the run position.
Ensure
neutral.
Pull the clutch lever fully into the
handlebar.
Turn the ignition switch on.
a firm,
NOTE
When
switched
tachometer
quickly sweep from zero to
maximum and then return
to
warning
illuminate and will then go
off
is for
normally remain on until the
engine
"Warning Lights" on page
34. I t is not necessary to
wait for the needle to return
the transmission
the ignition
needle
zero. The instrument
lights
(except those
starts
I
is in
is
the
will
will
which
See