Triumph Daytona 675 Owner's Handbook Manual page 31

will
ent
The gear change lights will not
operate below 4,000 rprn to avoid
the lights operating at idle, and will
not operate above 14,000 rpm.
LED RPM
3,000 rprn before
set change-up
speed
2,250 rprn before
set change-up
speed
1,500 rprn before
set change-up
speed
750 rpm before
LED
set change-up
speed
At set change-up
speed
The gear change lights will go
out in the reverse of the order
in which they illuminate.
3 LED mode: The three middle
lights illuminate when the set
limit is reached, and remain
illuminated until the
speed drops below the set limit.
7
illuminate when the set limit is
reached, and
illuminated until the engine
speed drops below the
mode: The gear change
OFF
lights can be set to OFF.
General Information
Adjusting Gear Change light
Modes
To adjust the gear change light
modes, turn the ignition to the 'ON'
position.
Press the 'Trip' and 'Scroll' buttons
simultaneously for 4 seconds, after 4
seconds the current mode will be
displayed.
engine
shown)
3 Scroll button
4 Set button
limit.
5