Clockflrip Computer - Triumph Daytona 675 Owner's Handbook Manual

General Information
odometer and trip meter display
modes or reset t h e trip meter with
the motorcycle in
may lead t o loss of motorcycle
Use the ' T r i ~ ' button t o switch
between the odometer
meter display modes. Press the 'Trip'
button repeatedly until the desired
display is visible. The display will
Scroll through in t h e order:
Odometer
Trip meter 1
Trip meter 2
To reset either of the trip meters,
select and display the trip meter t o
be zeroed then press the 'Trip' and
'Set' buttons together for 2 seconds.
After 2 seconds, the trip meter on
display will reset to zero.
motion as this
and trip
I
The
information appear on the same
display.
The
indication
speed, lap time, time and distance,
all recorded and calculated since the
last reset.
Each display provides t h e following
information:
Instantaneous Fuel Consumption
An indication of the fuel consumption
a t an instant in time.
Average Fuel Consumption
An indication of the average fuel
consumption, calculated from when
the trip computer was last reset.
After a reset the display will show
dashes until 0.1 miles/km has been
covered.
1 Clock/trip computer display
2 Scroll button
clock and trip
trip computer
of fuel
I
computer
provides an
consumption,