Runco LightStyle LS-1 series Operation Manual page 106

Specifications
Table 7-1. LS-1 Specifications (continued)
Microdisplay:
Native Resolution:
Aspect Ratios:
Projection Lens:
Picture Size (16:9 Screen):
Throw Ratios:
Vertical Lens Shift Range
(Ceiling Mount):
Light Output:
Sequential Contrast –
ConstantContrast On:
Cooling Performance:
Projection Modes:
Lamp:
Video Processing:
Calibration:
Performance
Texas Instruments DLP® 1080p DMD
Full HD, 1920 x 1080 (2,073,600 pixels)
Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3, 4:3 Narrow,
Letterbox (Anamorphic lens compatible)
All glass, F/2.5~2.71, f = 39.1~50.1mm, 1.3x manual
zoom, made in Japan
Recommended Width: 63 in. (1.60 m) to 85 in. (2.16 m)
Maximum Width: 106 in. (2.69 m)
Refer to Table 3-3
Down = 25% to 60% of screen height below lens center
(50% to 120% of one half of the screen height)
35 Foot-Lamberts (fL) (CSMS); 780 ANSI Lumens
Home Theater Calibration: 541 ANSI Lumens (CSMS)
10,000:1 typical
385:1 (CSMS)
High-efficiency, adaptive voltage side-to-side cooling
with low system acoustic noise level and low light
pollution cabinet
Front, Rear, Ceiling (front/rear)
User-replaceable 180W HPM, 4000 hour lifetime
Runco advanced ViVix processing with 10 bit
independent dual channel image processing, true 1080i
deinterlacing, MPEG artifact reduction (block and
mosquito noise), latest motion adaptive processing, 3D
noise reduction, detail enhancement, rich color
processing and noise reduction, less than one frame
latency
Full RGB gain/offset control (White Balance), Gamma,
Contrast, Color Temperature, Brightness
90 Runco LS-1 Installation/Operation Manual