Parts List - Directed Electronics AutoCommand 25522 Installation Manual

Do not connect this AutoCommand
so could cause serious property damage, personal injury, and will void all
warranties.
Tools required to install the AutoCommand
Wire cutters/strippers
Pliers
Test meter
We highly recommend that all connections be soldered for reliability.

Parts list

AutoCommand
®
Bag of Parts
Control harness (10 position)
6 Power & Ignition wires
Parts kit in plastic bag:
30 A Fuse
On/Off Control Switch
Window Decal
Hood Pin Switch Set
© 2005 Directed Electronics, Inc.
!! WARNING !!
module
to a manual transmission vehicle. Doing
®
Soldering iron
Screwdrivers
Drill and 1/2" bit
3 Tab Connectors
Warning Label
Ring Terminal
2 Cable Ties
unit:
®
3