Character Code Table - Citizen CD-S500 series Command Reference Manual

CONFIDENTIAL
Printing the download bit image/GS /
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
Page feed + Full cut at time of BM specification / GS FF
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
Command reference
GS / m
27 47 m
1B 2F m
0<m<255
● Prints the bit image defined by download bit image command.
[Caution]
● If data exist in the print buffer, this command will be ignored.
● If a download bit image has not been registered, this command is ignored.
Prints nothing unless m=0, 1, 2, 3.
GS FF
29 12
1D 0C
● The command is effective only at time of BM specification.
● During the reception of the command:
When auto cutter is valid:
When auto cutter is invalid: BM center skips to manual cut position and
● When using this command, area between head and cut becomes unprintable
area.
When auto cutter is valid:
When auto cutter is invalid: Approx. 28mm
● When performing a partial cut, set the [CUTTER] of the software switch to
PAR.
BM center skips to auto cut position and performs
full cut after page feed.
performs full cut after page feed.
Approx. 19mm
89
CD-S500 series
Star mode
CITIZEN