24:2
Temp at the end of heating in
final heating:
Temp at the end of the main wash:
Amount of water in main wash:
Amount of water in rinses:
Total energy consumption:
Drum Speed:
Water pressure:
Empty run test data
The temperature when the hea ting relay
is switched off after reaching 60ºC.
The temperature in the bath just prior to
drain after main wash.
The amount of supplied water to the
main wash.
The amount of water supplied in each
rinse.
The total energy consumed during the
program.
Drum speed measured in RPM.
Water pressure (Static) measured
close to inlet valve and during the filling
of water.