Electrolux FOM 71 CLS Maintenance Manual page 157

Failures
The water supply stops at about 8 litres.
• Configuration wrong. Go through all configuration steps and correct.
Too much water (Approx. 30 - 40 litre). Flow control unit sends Alarm.
• No signal from sensor to flow control unit.
• Check cables.
• Check that sensor wheel in the sensor unit rotates free. Can be easily
checked by removing the sensor housing and unscrew the 4 screws
holding the wheel.
Error message from flow control unit.
• Error in stored values. Reprogram the unit.
Flow meter control
5