HP Kayak XW 04xx Installation Manual page 6

HP Kayak XW Series 0480 PC Workstation — HP VISUALIZE fx6 Texture Module
Installing the Texture Module
Adding the Texture Module to the VISUALIZE fx6 Board
1 Remove the two screws from the board's strengthening bar, and then
remove it from the VISUALIZE Fx6 board. (You can use a Torx
screwdriver or a flat-blade screwdriver of the correct size.)
Terminator
2 Using both hands, carefully remove the terminator from the
VISUALIZE fx6 board. Store the terminator in a safe place (you may
need it at a later date).
3 Before installing the texture module, ensure that all four screws on
the texture module are fully retracted or removed.
6
TM
Strengthening Bar