Advertisement
WARNING
Two accessory
slot screws
CAUTION
HP Kayak XW Series 0480 PC Workstation — HP VISUALIZE fx6 Texture Module
Before handling the VISUALIZE fx6 graphics board, first wait until the
board has cooled down completely before touching it. The graphics
board can become hot during use.
4 Remove the two accessory slot screws and the retaining screw that
holds the board in place and, carefully ease the board up and out of
the PC Workstation's case using the board's strengthening bar.
When sliding the board up, ensure that the board does not snag or catch
against the PC Workstation's case or cables.
5 Place the board on a clean, dry surface.
Strengthening bar
Installing the Texture Module
Board-retaining screw
English
5
Advertisement
