Pick-Up Roller; Separation Pad - Canon LBP-800 Service Manual

B. Pick-up Roller
1) Open the cartridge cover unit.
2) Remove the pick-up roller by pulling
the lower part toward you.

Pick-up roller

Figure 3-4-2
C. Separation Pad
1) Performing the laser/scanner unit
removal procedures 1) through 5) on
page 3-5, remove the duct.
2) Performing the drive unit removal pro-
cedures on page 3-6, remove the drive
unit.
3) Remove the claw to slide the pick-up
roller shaft to the left.
Claw Pick-up roller shaft
Figure 3-4-3
4) Remove the sponge of the laser/scan-
ner unit.
CHAPTER 3
3 - 11