B. Microsoft Windows Nt4.0 - Canon LBP-800 Service Manual

CHAPTER 1

B. Microsoft Windows NT4.0

1. Installation of CAPT
A Canon Advanced Printing Technology installation disk is packed with this printer.
The types and contents are as follows:
Types:
• A 5-inch CD-ROM disk
Contents:
• CAPT driver
• Language monitor
• Status window
• Parallel port driver
• Installer
• CD-ROM menu
• Uninstaller
• Trouble shooter
• On-line help
• On-line manual
• Voice message
a. Operating Environment
The following environment is required to install CAPT.
PC hardware
This printer supports an IBM-PC or its compatible machine. The operating conditions are as
shown below.
<Minimum Operating Environment>
• CPU: Pentium or above
• RAM: 32 MB or above
• Available memory on the disk: 10 MB or above
• Printer port: Standard Centoronics parallel port
• CD-ROM drive
• Sound: PCM sound module is required to use the Voice message.
• Monitor size: 640 x 480 or above, 16 colors or above
• Network: 10 Base-T or 100 Base-TX is required to use network adapter.
<Recommended Operating Environment>
• CPU: MMX Pentium 200 MHz or above
• RAM: 48 MB or above
OS software
This printer operates only on Microsoft Windows x86 (Intel). It dose not operate on Alpha, MIPS
or PPC.
This printer does not operate on other OSs such as Windows NT3.x, Windows 3.x, Windows
for Workgroups, Windows CE, or Windows on OS/2. In general, Windows language and the soft-
ware language of this printer must match.
Printer cable
• Use a bi-directional 8-bit parallel interface cable for IBM-PC.
• Connections through the printer selector and printer buffer are not supported.
1 - 12