Button Pcb - Canon CANOSCAN D660U Service Manual

CHAPTER 3
B. Button PCB
1. Removing the button PCB
1) Remove the document cover.
2) Remove the document glass unit.
3) Move the scanning unit to the center.
4) Remove the button cable.
5) Remove two screws.
6) Remove the start button from the button PCB, caring not to lose the button spring.
q Start Button
w Button Cable
e Screw
r Button PCB
3 - 12
1
Figure 3-15
Figure 3-16
COPYRIGHT © 2000 CANON INC.
4
3 2
CANOSCAN D660U REV.0 JULY 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)