Renault Twingo Handbook page 20

FRONT sEATs
(2/2)
Access to the rear seats
Move handle 4 or 6 (depending on the
vehicle), move the seat back and slide
the seat forwards.
To return the seat to its original (stored)
position on the driver's side, slide the
seat backwards until it locks.
Do not move handle 2 and handle 4
or 6 at the same time.
1.14
4
2
Check that no object or
person prevents the front
seat from locking. If so,
remove
behind the front seats. Adjust the
seat to allow sufficient room in the
rear. The rear occupants/objects
should then return to the vehicle.
Repeat the above until the seat is
locked correctly.
Risk of seat moving on its runners
during vehicle acceleration or brak-
ing.
6
any obstacles We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
Make sure that the seatbacks are
correctly locked in place.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.