Renault Twingo Handbook page 186

FIttIng tHe rADIO
radio location 1
Unclip and remove the cover. The aerial
(depending on vehicle), + and – supply
connectors and left-hand and righthand
speaker wires are fixed to the rear face
of the cover.
– In all cases, it is very important to follow the manufacturer's instructions carefully.
– The specifications of the brackets and wires (available at approved accessory outlets) vary depending on the equipment
level of your vehicle and the type of radio.
Consult an approved dealer to find out the correct part number.
– No work may be carried out on the vehicle's electrical or radio circuits, except by approved dealers: an incorrectly connected
system may result in damage being caused to the electrical equipment and/or the components connected to it.
5.32
1
tweeter speakers
(depending on vehicle)
Using a flat-blade screwdriver or simi-
lar, unclip grille 2 to access the speaker
wires.
2
Front door speakers 3
(depending on vehicle)
Consult an approved dealer.
3