6 DIGITAL DELAY
The signal from the input channels, processed
by the built-in digital delay will feed to the master
output. There are three knobs here to control the
effect of digital delay.
LEVEL
This knob adjusts the mix level of the effect sound.
TIME
This knob adjusts the internal time of the delays;
turn to the right to increase the interval time between
two delays.
REPEAT
To increase the rate of the delays, turn this knob
to the right. You will hear the signal repeat at a
faster rate.
7 TAPE IN CONTROL
This knob adjusts the level of signal from the Tape
In to the Main bus.
8 MASTER CONTROL
This adjusts the final level of the Main bus. It
controls the Main bus signal which is output to
the speakers.
9 TAPE IN AND REC OUT
The TAPE IN sockets allow cassette recorders
or CD players to be added to the Main output.
The RECORD OUTPUT, with RCA phono sockets,
provides signal output to a cassette deck and
home audio equipment. The nominal output level
and impedance are -10dBV/600ohms.
PHONIC CORPORATION
POWERPOD408 / POWERRACK408 USER'S MANUAL
MASTER SECTION DESCRIPTION
Page 7