Master Section Description; Power Indicator; Digital Delay; Tape In Control - Phonic POWERPOD408 User Manual

MASTER SECTION DESCRIPTION

6 DIGITAL DELAY

The signal from the input channels, processed
by the built-in digital delay will feed to the master
output. There are three knobs here to control the
effect of digital delay.
LEVEL
This knob adjusts the mix level of the effect
sound.
TIME
This knob adjusts the internal time of the delays;
turn to the right to increase the interval time be-
tween two delays.
REPEAT
To increase the rate of the delays, turn this knob
to the right. You will hear the signal repeat at a
faster rate.

7 POWER INDICATOR

When the power switch at the rear panel is
turned on , this indicator will illumnate so the
user may be aware of it.

8 TAPE IN CONTROL

This knob adjusts the level of signal from the
Tape In to the Main bus.

9 MASTER CONTROL

This adjusts the fi nal level of the Main bus. It
con trols the Main bus signal which is output to
the speakers.

10 TAPE IN AND REC OUT

The TAPE IN sockets allow cassette recorders or
CD players to be added to the Main output. The
RECORD OUTPUT, with RCA phono sock ets,
pro vides signal output to a cassette deck and
home audio equipment. The nom i nal output level
and impedance are -10dBV/600ohms.
PHONIC CORPORATION POWERPOD408 USER'S MANUAL
MASTER SECTION DESCRIPTION
Page 7