Entering Text - Panasonic Lumix DMC-FT20 Operating Instructions Manual

Entering Text

It is possible to enter babies' and pets' names and the locations when recording. (Only
alphabetical characters and symbols can be entered.)
Display the entry screen.
•
You can display the entry screen via the following operations.
–
[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
–
[Name] in [Face Recog.]
–
[Location] in [Travel Date]
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
•
Move the cursor to [
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
•
To continuously enter the same character, move the cursor by
pressing [T] on the zoom button.
•
The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
–
[]]: Enter a blank
–
[Delete]: Delete a character
–
[ ]: Move the entry position cursor to the left
–
[ ]: Move the entry position cursor to the right
•
The following characters and numbers can be entered.
–
A maximum of 30 characters can be entered (Maximum of 9 characters when setting
names in [Face Recog.]).
¢ A maximum of 15 characters can be entered for [
(Maximum of 6 characters when setting names in [Face Recog.]).
Press 3/4/2/1 to move the cursor to [Set] and then press
[MENU/SET] to end text input.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
•
It is displayed in order of location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
Recording
] and then press [MENU/SET] to switch
- 80 -
], [ ], [ ], [ ] and [ ]