Panasonic Lumix DMC-FT20 Operating Instructions Manual page 147

[Thumbnail is displayed] appears on the screen.
•
Is it a picture that has been recorded with other equipment? In such cases, these pictures may
be displayed with a deteriorated picture quality.
The sound of the recorded motion pictures sometimes breaks up.
•
This unit automatically adjusts the aperture during motion picture recording. At such times, the
sound may break up. This is not a malfunction.
Motion pictures recorded with this model cannot be played back on other
equipment.
•
Even if a compatible MP4 playback device is used, the video or sound quality of the recorded
motion pictures may be poor, or they may not be able to be played. The recorded data may also
not be displayed properly in certain cases.
TV, PC and printer
The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to External Input Mode.
The display areas on the TV screen and the camera's LCD monitor are different.
•
Depending on the TV model, the pictures may be elongated horizontally or vertically or they
may be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (supplied) and then play back the pictures
on the camera.
The picture is not displayed fully on the TV.
> Check [TV Aspect] setting.
(P114)
(P51)
Others
- 147 -