Panasonic Lumix DMC-FT20 Operating Instructions Manual page 46

— [Travel Date]
•
The number of days that have passed since the departure date can be printed out using the
"PHOTOfunSTUDIO" bundled software on the CD-ROM (supplied).
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [World Time] to the travel destination, the travel date is calculated using the date in
the clock setting and the travel destination setting.
•
The travel date setting is memorised even if the camera is turned off.
•
The number of days that have passed since the departure date is not recorded before the
departure date.
•
[Location] cannot be recorded when taking motion pictures.
•
[Travel Date] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode will
be reflected.
Departure date and return date of the travel as well as the name
of the travel destination can be set.
You can display the number of days that have passed when
playing back the pictures and stamp it on the recorded pictures
with [Text Stamp] (P103).
[Travel Setup]:
[SET]:
Departure date and return date are set. Elapsed days (how
many days after) of the travel are recorded.
[OFF]:
Elapsed days are not recorded.
•
The travel date is automatically cancelled if the current date is after
the return date. If the [Travel Setup] is set to [OFF], [Location] will
also be set to [OFF].
[Location]:
[SET]:
Travel destination is recorded at the time of recording.
[OFF]
•
For details on how to enter characters, refer to
P80.
- 46 -
Basic
" "
Entering Text on