Troubleshooting - Panasonic Lumix DMC-FT20 Operating Instructions Manual

Troubleshooting

First, try out the following procedures (P140–151).
If the problem is not resolved, it may be improved by selecting [Reset]
[Setup] menu.
Battery and power source
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
•
The battery is exhausted. Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Auto Power Off] etc.
Side door does not close.
•
Insert all the way until you hear a locking sound and it is locked by the lever while being careful
about the direction the battery is inserted.
Recording
The picture cannot be recorded.
•
Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase available space in the memory.
(P40)
•
You may not be able to record for a short while after turning the power on when using a large
capacity card.
The recorded picture is whitish.
•
The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
> When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.
•
Is the inside of the lens fogged?
> There is condensation. Refer to
P5 for what to do.
Others
(P19)
"
When inner side of the lens is fogged (condensation)
- 140 -
(P51) on the
(P50)
"
on