Panasonic Lumix DMC-FT20 Operating Instructions Manual page 47

r [Beep]
u [Volume]
•
When you connect the camera to a TV, the volume of the TV speakers does not change. Also,
when connected, no sound is output from the camera speakers.
[LCD Display]
•
Some subjects may appear differently from actuality on the LCD monitor. However, this does
not affect the recorded pictures.
•
When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
This allows you to set the beep and shutter sound.
r [Beep Level]:
[t] ([Low])
[u] ([High])
[s] ([OFF])
[Beep Tone]:
[ ]/[ ]/[ ]
1 2 3
Adjust the volume of the speaker to any of the 7 levels.
Brightness, colour, or red or blue tint of the LCD monitor is
adjusted.
[Brightness]:
Adjust the brightness.
[Contrast · Saturation]:
Adjust the contrast or clarity of colours.
[Red Tint]:
Adjust the red tint.
[Blue Tint]:
Adjust the blue tint.
1
Select the settings by pressing
3/4, and adjust with 2/1.
2
Press [MENU/SET] to set.
- 47 -
Basic
[Shutter Vol.]:
[
[
[
[Shutter Tone]:
[
1
] ([Low])
] ([High])
] ([OFF])
]/[ ]/[ ]
2 3