Replacing The Power Supply - HP Pavilion Elite d5100 - ATX Desktop PC Manual

Replacing the Power Supply

After the power supply is in place, take time to organize cables, using the cable
organizers.
1 Replace the new power supply into the same placement it was originally.
2 Reinsert the four screws that hold the power supply in place.
3 Reconnect each cable to its component.
It can be difficult to see where some cables reconnect, if other components or cables
are in the way. Do not force connections.
WARNING: Be careful of sharp edges inside the chassis. It can be difficult to
see where some cables reconnect, if other components or cables are in
the way.
Upgrading and Servicing Guide
35