Removing And Replacing The Battery; Before You Begin - HP Pavilion Elite d5100 - ATX Desktop PC Manual

Upgrading and servicing guide
Hide thumbs Also See for Pavilion Elite d5100 - ATX Desktop PC:
Table of Contents

Advertisement

Removing and Replacing the Battery

30
Upgrading and Servicing Guide
1
Align the card tab (A) with the slot on the chassis (B), and gently but firmly press the
card straight down into the card slot. The whole card should be properly seated in
the slot.
With the graphics card, the locking tab will click as the card seats properly.
2
Replace the screw on the card slot.
A lithium battery on the motherboard provides backup power for the computer's
timekeeping capability.
When the battery starts to weaken, the date and time may be incorrect. If the battery fails,
replace it with a CR2032 lithium battery (3-volt, 220 mAh rating) or its equivalent.

Before You Begin

Observe the following requirements before removing and replacing the battery:
WARNING: There is danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type of battery. Discard used
batteries according to the manufacturer's instructions.
CAUTION: Never use metal objects, such as pliers, to remove or replace the
battery. Metal contact may cause a battery short and damage the battery.
A
B

Advertisement

Table of Contents
loading

Table of Contents