Setting Your Changes As The New Default - Brother MFC-J4510DW Advanced User's Manual

NOTE
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
send a color fax (choosing Color in
Color Setting), the machine will send
the fax using the Fine setting.
Setting your changes as the
new default
You can store the fax options you use
frequently for Fax Resolution,
Contrast, Glass Scan Size, Preview,
Real Time TX and Color Setting by
saving them as the default settings. These
settings will stay until you change them again.
a
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
b
Press Options.
c
Swipe up or down, or press a or b to
choose the setting you want to change,
and then press your new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting to your
preferred option, swipe up or down, or
press a or b to display
Set New Default.
e
Press Set New Default.
f
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g
Press .
Sending a fax
3
3
13