Restoring The Network Settings To Factory Default - Brother MFC-J280W User Manual

Multi-protocol on-board ethernet multi-function print server and wireless ethernet multi-function print server
Hide thumbs Also See for MFC-J280W:
Table of Contents

Advertisement

Control panel setup

Restoring the network settings to factory default

You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
Note
• For MFC-J825DW/J835DW/J5910DW and DCP-J925DW, this function restores all wired and wireless
network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management (MFC-J5910DW only). (For more information, see Other Management Utilities
uu page 7.)
For MFC-J425W/J430W/J432W/J435W
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 for Reset.
e
Press 1 for Reboot.
f
The machine will re-start.
For MFC-J280W/J625DW/J825DW/J835DW/J5910DW and DCP-J525W/J725DW/J925DW
a
Press Menu.
b
Press Network.
c
Press a or b to display Network Reset and then press Network Reset.
d
Press Yes.
e
Press Yes for 2 seconds to confirm.
4
4
4
4
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents