Configuration In Ad-Hoc Mode; Configure The Wireless Settings - Brother MFC-J280W User Manual

Multi-protocol on-board ethernet multi-function print server and wireless ethernet multi-function print server
Hide thumbs Also See for MFC-J280W:
Table of Contents

Advertisement

Configuring your machine for a wireless network

Configuration in Ad-hoc Mode

Configure the wireless settings

For MFC-J425W/J430W/J432W/J435W
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
Note
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
a SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please
see the information included with your computer or contact your network administrator.
SSID (Network Name):
Communication Mode
Ad-hoc
For example:
SSID (Network Name):
HELLO
Communication Mode
Ad-hoc
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Setup Wizard.
Press OK.
e
When Enable WLAN? is displayed, press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
f
The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using a or b.
Press OK.
Encryption mode
WEP
NONE
Encryption mode
WEP
Network key
Network key
12345678
3
3
3
3
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents