Dc Controller/Dc Power Supply Pcb - Canon FC220 Service Manual

C. DC Controller/DC Power
Supply PCB
1. Detaching the DC Controller/DC
Power Supply PCB
1) Detach the body cover.
2) Remove the drive release arm
3) Remove the screw
nect the two connectors
4) Disconnect the four fastons
5) Detach the bottom cover.
6) Hold the flat cable
hands, and detach them from the
connector by lifting them straight up.
7) Disconnect the connector
COPYRIGHT © 1998 CANON INC.
.
, and discon-
.
.
with both
.
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
Figure 7-201C
Figure 7-202C (front)
7-11