Iii.mechanical System - Canon FC220 Service Manual

CHPTER 4 IMAGE FORMATION SYSTEM

III.MECHANICAL SYSTEM

Here, the copier is discussed in terms of its mechanical characteristics and
operation and how to disassemble and assemble it.
Be sure to observe the following for disassembly/assembly work:
!
1. Disconnect the power cord for safety before disassembly or reassembly
work.
2. Unless otherwise noted, reassembly is the reverse of disassembly.
3. Group the screws by type (length and diameter) and location.
4. One of the mounting screws used on the rear cover is provided with a washer to
protect against static electricity. Be sure to keep the washer with the screw when
mounting the cover.
5. The fixing screw for the grounding wire and varistors is fitted with a washer to
ensure electric continuity; be sure to use the washer for reassembly.
6. If possible, avoid operating the machine with any of its parts removed.
4-18
COPYRIGHT © 1998 CANON INC. CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)