Grill Assembly - Broil King P3S-1 Owner's Manual

GRILL ASSEMBLY

Installing Racks
Place the briquet rack (8) or flavor screen rack (28) on the burner
assembly.
Position the flavor screen (29) on to flavor screen rack (28) or the
ceramic briquets (7) evenly on the briquette rack without overlap-
ping.
For Smoker Shutter installation see DPA100 manual included
with your P3S grill.
Set the multilevel cooking grids. See Figure 9.
Installing Char-Master Briquets
Individually place the 'Char-Master' briquets in a single layer
evenly on your grill's briquet rack; DO NOT dump them onto the
briquet rack. A single layer of 'Char-Master' briquets is all that's
needed. DO NOT overlap or stack the briquets.
See Figure 9.
After properly placing the 'Char-Master' briquets on your grill's
briquet rack, there may be some briquets left over. Save them for
future use.
Before cooking, always preheat the grill as directed by the grill's
operating instructions. Hot briquets cause better, quicker cooking
and better flavor.
Cleaning
Routine preheating and routine burn-off (also called postheating)
of a grill will clean the 'Char-Master' briquets. Periodically turn
the briquets over while they are cool.
B101362-2-0610
6B
4
Figure 9a
7
5
8
17
6
30
(P3S only)
29
Figure 9b
Page 13