Table of Contents
Advertisement
Setting up the charger and additional handset
1. Plug the power adaptor cable into the underside of
the charger.
Power adaptor cable
2. Plug the power adaptor into the mains wall socket and
switch the power on.
3. Place the battery ribbon in the base of the handset
battery compartment. Insert the 2 x AAA rechargeable
batteries supplied observing the polarity (+ and -)
markings. Then slide the battery compartment cover
into place.
4. Place the handset in the charger and charge the handset
for at least 24 hours. The red Charging light on the
charger comes on and the
Your BT Freestyle 650 is ready for use.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
icon begins to scroll.
Getting started
BT Freestyle 650
Additional Handset
Your BT Freestyle 650 handsets
are the same, so instructions
throughout this guide apply
to both.
Handset numbers
Once registered with the base,
each handset will display its
handset number, 1 and 2
respectively.
11
Advertisement
Table of Contents
