BT DIVERSE 6450 User Manual
  1. Manuals
  2. Brands
  3. BT Manuals
  4. Cordless Telephone
  5. Diverse 6450
  6. User manual
BT DIVERSE 6450 User Manual

BT DIVERSE 6450 User Manual

Digital cordless telephone answering machine
Hide thumbs Also See for DIVERSE 6450:
Table of Contents

Advertisement

Quick Links

Download this manual

User Guide

BT DIVERSE 6450

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIVERSE 6450 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BT DIVERSE 6450

Summary of Contents for BT DIVERSE 6450

  • Page 1: User Guide

    User Guide BT DIVERSE 6450...
  • Page 2 Expandable system. You can have up to 6 GAP ■ compatible handsets registered to your BT Diverse 6450 base. Make internal calls between two handsets while a third is on an external call. Digital call clarity with up to 300m range outdoors and ■...
  • Page 3 Need help? ■ If you have purchased a BT Diverse 6450 If you have any problems setting up or using your BT multiple pack you will Diverse 6450, contact the Helpline on 0870 240 3962 or also have the following email bt.helpdesk@vtecheurope.com...

  • Page 4: Table Of Contents

    In this guide Getting started ....8 Directory ..... . .23 Location .
  • Page 5 ..... . .50 BT Helpdesk ....38 Open a user area .
  • Page 6 Dialling mode ....78 Install the BT Picture Music on hold ....79 and Ringtone Manager .
  • Page 7 Register additional handsets ..84 Register a Diverse 6400 handset to your Diverse 6450 base ..85 Register your handset to another base . .85 Select a base ....86 De-register handset .

  • Page 8: Getting Started

    Getting started Location WARNING Do not place your BT Diverse 6450 You need to place your BT Diverse 6450 base close in the bathroom or other humid areas. enough to a mains power and telephone socket so that the cables will reach.

  • Page 9: Battery Low Warning

    Eventually they will need to be replaced. Batteries and handset may Telephone line cord become warm during charging. This is normal. Your BT Diverse 6450 is ready for use.
  • Page 10 6450, please call the BT Diverse Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com Location You need to place your BT Diverse 6450 charger close enough to a mains power socket so that the cable will reach. Setting up the charger 1.
  • Page 11 Pull the plastic tag as instructed to activate the batteries. 4. Place the handset in the charger and charge the handset for at least 16 hours. Follow instructions on page 84 for registering additional handsets to the BT Diverse 6450 base.

  • Page 12: Getting To Know Your Phone

    Press to end calls. Also lets you exit from menu. R. Recall Headset socket For use with switchboards and Lets you plug in a headset, certain network services. page 18. Quick access to a range of BT Calling Features, page 36.

  • Page 13: Main Display Icons

    Getting to know your phone Main display icons Answering machine on. Handset ringer off. Angled – during a call. In range. Flashes when Moving – incoming call or you are out of range. caller on hold. Handset 3 Shows current battery level. New calls.

  • Page 14: Base

    Getting to know your phone Base On/Off/Ans Power/In Use Switches your indicator answering machine On when the on/off, page 60. power is connected. Find Flashes when line Rings all registered is in use. handsets, so you can find them. SIM reader Insert a SIM card for Used to register copying numbers/...

  • Page 15: Navigating The Menus

    Getting to know your phone Navigating the menus… Your BT Diverse 6450 has a menu system which is easy to use. Each menu leads to a list of options. Have a look at the menu map on the following page.

  • Page 16: Menu Map

    Getting to know your phone Exit menu If you want to exit a menu or the directory, either press until the display returns to standby, or press BACK until the standby screen appears. Menu map Names Answer Sounds & Handset Base Settings Calendar/ Registration...

  • Page 17: Using Your Phone

    Using your phone Switch handset on and off Note Press the BACK options button to 1. Press and hold to switch the handset off. go back to the previous step in a menu. Or press END to cancel and 2. Press again to switch it back on.

  • Page 18: Handsfree

    Using your phone Handsfree Handsfree lets you talk to your caller without holding the handset. It also enables other people in the room to listen to both sides of your conversation. 1. Press twice. Display shows and you can hear the dial tone over the handset speaker.

  • Page 19: Secrecy

    Using your phone Secrecy When on a call, you can talk to someone in the same room without your caller hearing. 1. During a call, press SECRECY. Display shows SECRECY . Your caller cannot hear you. 2. Press again to resume your call. Redial You can redial any of the last ten numbers.
  • Page 20 Using your phone Save a redial number You can save a number to the directory. 1. Press . The last number dialled is displayed. Scroll DOWN to the number you want. 2. Press OPTIONS and scroll DOWN SAVE NUMBER Press OK. 3.

  • Page 21: Keypad Lock

    Using your phone Keypad lock You can lock the keypad to prevent accidentally dialling numbers while carrying it around. 1. Press and hold until you hear a beep. Screen shows KEYPAD LOCKED 2. To unlock the keypad, press UNLOCK then Display shows KEYPAD UNLOCKED Quick access to messages...

  • Page 22: Messages On The Answering Machine

    Using your phone Messages on the answering machine 1. Press . Screen highlights . Press OK. 2. Scroll DOWN MESSAGES 3. Message playback will then begin. Use to hear messages through the speaker. 4. If required, press PAUSE or DELETE. 5.

  • Page 23: Directory

    Using your phone Directory You can store up to 200 names and numbers in the directory. Names can be up to 16 characters long and numbers up to 24 digits long. Open the directory 1. Press NAMES. Stored entries are displayed alphabetically. Entering names Use the keypad letters to enter names, e.g.

  • Page 24: Character Map

    Using your phone Character map Button Upper case Lower case Space 0 + & _ $ £ € ¥ < > = # * Space 0 + & _ $ £ € ¥ < > = # * . , ’ ? ! ” 1 - ( ) @ / : ; .

  • Page 25: Insert A Pause Into A Directory Entry

    Insert a pause into a directory entry You may need to do this if your BT Diverse 6450 is connected to a switchboard. 1. When entering a number, usually after entering the switchboard access code (e.g. 9) press and hold until appears in the display.

  • Page 26: View A Directory Entry

    Using your phone View a directory entry 1. Press NAMES and scroll DOWN to the entry you want then press OPTIONS. 2. Scroll DOWN SHOW DETAILS and press OK. 3. The name and number is displayed along with any selected ringtone and picture. 4.

  • Page 27: Copy Entire Directory To Another Handset

    Using your phone Copy the entire directory to another handset IMPORTANT Copying an entire directory will 1. Press NAMES then OPTIONS. replace any existing entries stored in the receiving handset. 2. Scroll DOWN and press OK. COPY DIRECTORY 3. Scroll LEFT RIGHT to enter the number of the...

  • Page 28: Delete An Entry

    Using your phone 5. If required, scroll DOWN PICTURE and press LEFT RIGHT to select a picture. Press VIEW to see the picture to save it. 6. Press SAVE. 7. Press to return to standby. Delete an entry 1. Press NAMES and scroll DOWN...

  • Page 29: Copy To/From Sim Card

    If you have problems copying directory entries from your SIM onto 1. Insert the SIM card into the SIM READER slot on the the BT Diverse 6450 place the SIM back into your mobile and confirm base. that the directory entries are stored on the SIM and not within the mobile handset directory.

  • Page 30: Internal Calls

    Using your phone 7. Screen shows COPY ENTRY/COPY ALL . Use DOWN to highlight the option you want and press OK. 8. If selecting a single entry, the screen shows NAME COPIED You can now select another entry. If copying all entries, each entry is displayed and copied until all entries are copied or the directory is full.

  • Page 31: Transfer A Call To Another Handset

    Using your phone Transfer a call to another handset 1. During an external call, press . Your caller is put on hold. 2. If you have two handsets, the other handset will ring. If you have more handsets, select the handset number you want to call and press OK.

  • Page 32: Conference Call

    Using your phone Conference call You can hold a 3-way conversation with an external caller and another handset user at the same time. 1. During an external call, press . Your caller is put on hold. 2. If you have two handsets, the other handset will ring. If you have more handsets, select the handset number you want to call and press OK.

  • Page 33: Caller Display

    If you have stored a name to go with the number in your For more details on BT’s handset directory, the name will be displayed instead. Calling Features, call BT free on 0800 800 150. Calls list When you have missed calls, the...

  • Page 34: View The Calls List

    Caller Display View the Calls list 1. Press CALLS to open the Calls list. 2. Display shows details of calls. Scroll DOWN through the list. 3. Press to return to standby. Dial from the Calls list 1. Press CALLS to open the Calls list. 2.

  • Page 35: Delete An Entry In The Calls List

    Caller Display 6. If required, scroll DOWN PICTURE and press LEFT RIGHT to select a picture. Press VIEW to see the picture to save it. 7. Press SAVE. 8. Press to return to standby. Delete an entry in the Calls list 1.

  • Page 36: Bt Calling Features

    The BT Calling Features works in exactly the same way as the main BT Diverse 6450 gives you easy access to a range of name and number directory and pre-stored BT Calling Features. can store up to 10 entries.

  • Page 37: Call Divert Off

    2. Listen to hear the status of your Call Divert. Call Waiting On If you are not connected to the BT network, some of these services Call Waiting lets you know if another person is trying to may not be available. Please contact your Network Provider.

  • Page 38: Call Waiting Off

    1. Press then scroll DOWN CHECK CALL WAITING press 2. Listen to hear the status of your Call Waiting. BT Helpdesk 1. Press then scroll DOWN BT HELPDESK press 2. The BT Helpdesk for this product will be automatically dialled.

  • Page 39: Sms Text Messages

    Welcome to the BT SMS Service on your BT Diverse SMS stands for Short Messaging Service 6450. The service is provided by BT. Your BT Diverse 6450 can send and receive SMS messages from participating IMPORTANT mobile networks and compatible landline telephones in You must subscribe to your the UK.

  • Page 40: Cost Of Fixed Line Service

    SMS text messages Cost of the fixed line service There is no subscription charge (other than the subscription to Caller Display). Visit the BT.com website (www.bt.com) to find out how much it costs to send a SMS text message (depends upon your call package).

  • Page 41: Receiving A Call While Writing A Text

    You can now continue writing your message. Sent messages are stored in the Outbox Your BT Diverse 6450’s outbox is like a redial list. It holds a copy of the last 5 messages sent. The newest messages replace the oldest messages in the outbox.

  • Page 42: Entering Text

    Saved messages are stored in the Drafts folder If you want to save a message to complete and/or send later you can store it in the drafts folder. Your BT Diverse 6450 can store up to 5 messages. Received messages are stored in the Inbox Your BT Diverse 6450 can store up to 30 messages.

  • Page 43: Writing Tips

    SMS text messages Writing tips If you make a mistake, press CLEAR to delete the last character or digit to the left of the cursor. 1. Press UP/DOWN/LEFT/RIGHT press to move the cursor. 2. Press once to insert a space. 3.

  • Page 44: Edit Sms Templates

    SMS text messages Edit SMS templates You can overwrite the existing templates with your own messages, up to 32 characters long. 1. Press MENU, SMS MESSAGES is highlighted, press scroll DOWN TEMPLATES and press OK. 2. The available templates are displayed. Scroll to the template you want and press OPTIONS.

  • Page 45: Read, Edit And Send Draft Sms Messages

    SMS text messages Read, edit and send draft SMS messages If you have saved a message you have written for sending later, you can view, edit and send it from the Draft Messages box. 1. Press MENU, SMS MESSAGES is highlighted, press scroll DOWN .

  • Page 46: Reading Sms Text Messages

    YOU HAVE NEW . To read new messages: Inbox capacity either press then OK. Your BT Diverse 6450 can store up to 30 received text messages. or open the Inbox by pressing MENU, SMS MESSAGES highlighted, press OK, scroll DOWN then OK.

  • Page 47: Sms Alert

    SMS text messages 4. Follow the on-screen prompts to save, write, send or delete the messages. Or press BACK to return to the previous menu level. SMS alert Your handset will beep when you receive an SMS text message. The default setting is On. You can switch this off. 1.

  • Page 48: Adding Or Changing Sms Service Centre Numbers

    Select a Send Service Centre number If you enter additional Service Centre numbers, you can choose which send Service centre you want to use. Your BT Diverse 6450 is pre-set to send using Service Centre 1 and receive using Service Centre 2. 1. Press MENU,...

  • Page 49: Sms User Areas

    SMS text messages SMS User Areas Your BT Diverse 6450 is pre-set to make all text messages available to every user. You can set up to 4 PIN protected user areas for your BT Diverse 6450 so that text messages can be kept private.

  • Page 50: How Callers Send A Text To A User Area

    SMS text messages 7. Scroll DOWN PIN PROTECTION and press LEFT RIGHT to select 8. Scroll DOWN . Enter your PIN if you have PIN CODE changed this from the factory setting of 0000 and PIN protection is set to ON. 9.

  • Page 51: Answering Machine

    If you subscribe to your network provider’s Caller Display service, the date and time are set automatically when your BT Diverse 6450 receives its first call, but you will also need to set the year using a handset, see page 83.

  • Page 52: Operating The Answering Machine

    Outgoing messages This is the message your callers hear when the answering machine picks up their call. Your BT Diverse 6450 comes with two pre-recorded outgoing messages to choose from. Answer mode You can set your answering machine to Answer & Record...

  • Page 53: Answer & Record

    Answering machine Answer & Record This invites your caller to leave a message. The pre-recorded message is ‘Hello, your call cannot be taken at the moment, so please leave your message after the tone’. Answer Only This does not allow your caller to leave a message. The pre-recorded message is ‘Hello, your call cannot be taken at the moment, and you cannot leave a message, so please call later’.

  • Page 54: Play Outgoing Message

    Answering machine RECORD MESSAGE is highlighted. 4. Press then use DOWN to select ANSWER & RECORD ANSWER ONLY 5. Press OK. Display shows RECORDING . Record your message. 6. Press SAVE to stop recording or DELETE to cancel. 7. Your message is played back. When you are happy with your outgoing message, press OK.

  • Page 55: Answer Delay

    Answering Machine Settings, page 58. BT Diverse 6450 answering machine picks up a call. The default setting is 20 seconds. You can select an answer delay of 0, 5, 10, 15, 20, 25, 30 seconds or Time Saver.

  • Page 56: Open All Messages

    CLEAR to return the display to it’s Incoming messages on your BT Diverse 6450 can be up to normal standby state. Your messages will not be affected. 3 minutes long. If the caller is still talking after 3 minutes, the prompt announces ‘Thank you for calling’...

  • Page 57: Delete All Messages

    Answering machine 3. When the last message is played, the prompt announces, ‘End of messages’. Delete all messages 1. On your handset, press MENU, scroll DOWN ANSWER MACHINE and press OK. 2. Scroll DOWN and press OK. DELETE MESSAGES Press to confirm or to cancel.

  • Page 58: Call Screening

    Answering machine settings The Answer Machine settings menu lets you set the: Answer Mode – Answer & Record or Answer Only outgoing message. Answer Delay – set the time your BT Diverse 6450 answering machine takes to take your calls.

  • Page 59: Memory Full

    Answering machine Message Alert – set an audible beep when you have new answering machine messages. Security PIN –enables remote access to your messages You can keep a note of your Remote Access Security PIN by from any TouchTone™ phone, see page 62. writing it in the space provided on page 92.

  • Page 60: Operating The Answering Machine

    Answering machine If a caller is leaving a message when the memory becomes full your machine will announce ‘Thank you for calling’ and hang up. The machine will also automatically set to Answer Only. You must delete messages before you can receive any new ones. Operating the answering machine at the base Switch on/off...

  • Page 61: Play, Repeat, Skip And Delete

    Press twice to delete all messages. Remote access Security PIN You can operate your answering machine from any modern phone by calling your BT Diverse 6450 and entering a 4-digit security code. (See ‘Operating your answering machine from another phone’.)

  • Page 62: Operating Your Answering Machine From Another Phone

    Answering machine The pre-set code is 0000. You can change this to help prevent unauthorised callers from listening to your messages. To change your remote access Security PIN see Answering Machine Settings, page 58. Operating your answering machine from another phone 1.

  • Page 63: Switch Answering Machine On Remotely

    This gives you time to hang up before you are connected, saving you the cost of a call. To set Answer Delay, see Answering machine settings, page 58. If you don’t give any instructions for 8 seconds, your BT Diverse 6450 will hang up.

  • Page 64: Sounds & Pictures

    Install the BT Picture and Ringtone Manager To download additional ringtones and pictures to use on your handsets, you must install the BT Picture and Ringtone Manager on the CD. 1. Insert the CD into your PC’s CD ROM or DVD drive.

  • Page 65: Pictures

    5. Plug the other end into your handset. Pictures Download a picture 1. Click on the BT Picture and Ringtone Manager desktop icon. The main screen opens. If your handset has been found, the screen shows in the bottom Phone Connected right corner.

  • Page 66: Edit A Picture

    Sounds and pictures Edit a picture You cannot save over the currently opened file. Once you have opened a picture on your PC and before downloading it to your phone, you can: select a section enlarge or reduce rotate change the colour adjust the brightness.
  • Page 67 Sounds and pictures Zoom Out 1. Move your mouse over the Zoom Out button and click on it once with your mouse. The image will now zoom out centered on the Preview Box. Click the Zoom Out button as many times as required. Rotate Left/Right 1.

  • Page 68: Save An Image File On Your Pc

    Sounds and pictures 2. Click and drag the sliders. As you adjust the settings, you can see the results on the Preview Panel. 3. Click button to save or Cancel to return to the original settings. Save an image file on your PC You can also click on HELP for the on-screen guide.

  • Page 69: Ringtones

    Download a Ringtone When your handset ringtone file is full, you must delete ringtones 1. Click on the BT Picture and Ringtone Manager desktop from it before you can download new ones. icon. The main screen opens. If your handset has been...

  • Page 70: Set, Rename Or Delete A Ringtone

    Sounds and pictures You can now: PLAY – Click to play the ringtone STOP – Click to stop playback. PAUSE – Click to pause playback – Click to adjust the volume (make sure your PC speakers are switched on). 5. Click to download the Ringtone to your handset.

  • Page 71: Record A Ringtone

    6. Press BACK to return to standby. Uninstall 1. To uninstall the BT Picture and Ringtone Manager, insert the BT Picture and Ringtone Manager CD into your PC’s CD ROM or DVD drive. 2. When the Welcome screen appears, click on...

  • Page 72: Repair

    Sounds and pictures Repair If you have a problem with your BT Picture and Ringtone Manager application, you can repair the program. 1. Insert the BT Picture and Ringtone Manager CD into your PC’s CD ROM or DVD drive. 2. When the Welcome screen appears, click on INSTALL/UNINSTALL.

  • Page 73: Handset Settings

    Handset settings Ringer melody and volume You can set separate ring melodies for external and internal calls. You can choose from any of the ringtones stored on your handset. To store new ringtones, see page 70. Select from 5 volume levels plus Off. 1.

  • Page 74: Battery Save Mode

    Handset settings 3. Press LEFT RIGHT to select the WALLPAPER. Press DOWN. 4. Press LEFT RIGHT to select the MENU COLOUR Press DOWN. 5. Press LEFT RIGHT to select FONT SIZE . Press DOWN. 6. Press LEFT RIGHT to select the contrast level. 7.

  • Page 75: Handset Name

    Handset settings Handset name When registered to the base, each handset is given a number 1-5. You can also give the handset a name to match the location or user, e.g. Mike or Office. 1. Press MENU then scroll DOWN HANDSET SETTINGS and press OK.

  • Page 76: Auto Talk

    Select base You can register your BT Diverse 6450 handset to up to 4 bases. If your handset has been registered to more than one base you can select which one it uses.
  • Page 77 Handset settings 2. Scroll DOWN SELECT BASE and press OK. All bases to which the handset is registered are displayed. 3. Use DOWN to select the base you want and press OK. 4. Press SAVE. 5. Press to return to standby or BACK to go one step back in the menu.

  • Page 78: Base Settings

    Base settings Ringer melody and volume Choose from 5 melodies and 5 volume levels plus Off. 1. Press MENU then scroll DOWN BASE SETTINGS press OK. Display shows RINGER 2. Press then LEFT RIGHT to hear the melodies. 3. Press DOWN and use LEFT...

  • Page 79: Music On Hold

    Base settings Music on hold Choose whether an external caller will hear musical tones if you put them on hold, e.g. while transferring them to another handset. The default setting is On. 1. Press MENU then scroll DOWN BASE SETTINGS press OK.

  • Page 80: Repeater Mode

    Base settings 4. Display shows ENTER NEW PIN . Enter the new PIN and press SAVE. Display shows CONFIRM NEW PIN . Enter your new PIN again. 4. Press SAVE. The display shows SYSTEM PIN CHANGED 5. Press to return to standby or BACK to go one step back in the menu.

  • Page 81: Calendar/Clock

    Calendar/Clock Use the Calendar and Clock functions to: Set up to 5 appointment reminder calls. ■ Set an alarm call. ■ Set the time & date. ■ Select time to appear in 12hr or 24hr format. ■ Appointment reminder You can set reminder calls on each handset for up to 5 separate appointments.

  • Page 82: Alarm

    Calendar/Clock 7. Enter the DATE of the appointment and press DOWN. 8. Press LEFT RIGHT to select the ringtone you want. 9. Press SAVE. 10. Press to return to standby or BACK to go one step back in the menu. Alarm You can set an alarm call for an individual handset.

  • Page 83: Time & Date

    Calendar/Clock Time & Date 1. Press MENU then scroll DOWN CALENDAR/CLOCK press OK. 2. Scroll DOWN TIME & DATE and press OK. 3. Enter the correct time then scroll DOWN. 4. Enter the correct date and scroll DOWN. 5. Press LEFT RIGHT to select the...

  • Page 84: Additional Handsets And Bases

    Each handset can be registered on up to four bases. Registering additional handsets The handset that came with your base is pre-registered. If you buy new handsets to use with your BT Diverse 6450 they will have to be registered to the base before you can use them.

  • Page 85: Register A Diverse 6400 Handset To Your Diverse 6450 Base

    Additional handsets and bases Register your handset to another base On the handset: 1. Press MENU then scroll DOWN REGISTRATION press OK. Display shows REGISTER HANDSET 2. Press OK. The next available base is highlighted automatically, e.g. BASE 2 3. Press OK. Enter the SYSTEM PIN (original setting 0000) and press OK.

  • Page 86: Select A Base

    Additional handsets and bases Select a base On the handset: 1. Press MENU then scroll DOWN HANDSET SETTINGS and press OK. Scroll DOWN SELECT BASE 2. Press OK. Display shows BASE 2 BASE 3 etc. Scroll to the base you want and press OK. De-register a handset You can use a handset to de-register itself or any other handset from the base.

  • Page 87: Help

    Forgotten your PIN number Try entering the default PIN = 0000. If you have changed the number and cannot ■ remember it, contact the BT Diverse Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com No display Check that the handset batteries are charged. If necessary, replace the batteries.

  • Page 88: Possible Problems With Sms

    Help Handset does not ring Check that the batteries are inserted correctly. ■ Check that the handset ringer has not been switched off, see page 17. ■ Your caller cannot hear you Secrecy is switched on. Press the secrecy option button to speak to your caller again. ■...
  • Page 89 ■ Further help and advice for SMS queries on BT lines: BT Residential customers – call 151, choose option 2, when prompted by the Fault ■ Management Service select option 2, enter your phone number on the handset and wait to speak to a customer adviser.
  • Page 90 BT Residential lines – call 150. BT Business lines – call 152. ■ For non BT line customers, call 0800 800 150 (residential) or 0800 800 152 (business). ■ Additional handsets are available from the Helpdesk on 0870 240 3962.

  • Page 91: Helpline

    You have pressed the wrong button in a sequence. Check the prompts in the display or ■ refer to instructions in this user guide. Customer Helpline If you experience any difficulties please call the BT Diverse Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com...

  • Page 92: For Your Records

    Help For your records Date of purchase: Place of purchase: For guarantee purposes, proof of purchase is required, so please keep your receipt. Enter your Remote Access PIN code Enter your system PIN here: here: For more information on your For more information on your system PIN, see page 79.

  • Page 93: General Information

    This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. Safety information Only use the power supply suitable for the BT Diverse 6450 range. Using an unauthorised ■ power supply will invalidate your guarantee and may damage the telephone.

  • Page 94: Cleaning

    General information Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release ■ of highly toxic chemicals. Cleaning Simply clean the handset and base with a damp (not wet) cloth, or an anti-static wipe. ■...

  • Page 95: Connecting To A Switchboard

    To change the dialling mode, see Dialling, page 78. Guarantee Your BT Diverse 6450 is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to replace the BT Diverse 6450, or any component...
  • Page 96 If you experience difficulty using the product, prior to returning your product, please read the Help section beginning on page 87 or contact the BT Diverse Helpdesk for assistance on 0870 240 3962 or email bt.helpdesk@vtecheurope.com. The helpline is open from 9.00am-5.30pm Mon-Fri and 9.30am-2.30pm Saturdays.

  • Page 97: Additional/Replacement Items

    The BT Diverse 6450 has a total REN of 1, i.e. for a base and up to 6 handsets. Any other instrument provided by BT may be assumed to have a REN of 1 unless stated otherwise.
  • Page 98 Nothing in this publication forms any part of any contract. © British Telecommunications plc 2005. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. BT Diverse 6450 Issue 2 (01/05) 1 Designed and produced by The Art & Design Partnership Ltd. Printed in China...

Table of Contents