Linux - IBM 9123710 - eServer OpenPower 710 Introduction Manual

Figure 2-8 eConfig tab for CSP selection
Note: The order submitted must include the CSP feature code 8453 on the configuration,
and the form submitted to the CSP site must include the.lvt output file and the order
number of the system.
CSP is available on a limited number of POWER5 systems. See the following URL for details:
http://www.ibm.com/servers/eserver/power/csp/index.html

2.8.6 Linux

For the OpenPower 710 server, Linux distributions were available through Novell SUSE and
Red Hat at the time this publication was written. The OpenPower 710 server requires the
following version of Linux distributions:
SUSE LINUX Enterprise Server 9 for POWER or later
Red Hat Enterprise Linux AS for POWER Version 3 or later
Note: Dynamic LPAR is not supported by Red Hat Enterprise Linux AS for POWER
Version 3.
Information on features and external devices supported by Linux on the OpenPower 710
server can be found at:
http://www.ibm.com/servers/eserver/pseries/linux/
36
IBM eServer OpenPower 710 Technical Overview and Introduction