Table of Contents
Advertisement
Table 1-4 Advanced POWER Virtualization option
Feature code
1965
For a detailed discussion on logical partitioning and virtualization, please refer to "The
POWER Hypervisor and Virtual I/O Server technologies" on page 26.
1.4.3 Memory features
The minimum memory requirement for the OpenPower 710 server is 1 GB, and the maximum
capacity is 32 GB. Memory DIMMs are installed into eight DIMM sockets located on the
system planar. The supported memory is 266 MHz DDR1 DIMMs. Table 1-5 lists the available
memory features.
Table 1-5 Memory feature codes
Feature code
1949
1950
1951
1952
1.4.4 Disk and media features
The OpenPower 710 server features four disk bays and one slimline media bay. The minimum
configuration requires at least one disk drive. Table 1-6 shows the disk drive feature codes
that each bay can contain.
Table 1-6 Hot-swappable disk drive options
Feature code
1970
1968
1971
1969
1972
1973
A DVD-ROM or DVD-RAM drive can be installed in the slimline bay:
DVD-ROM drive, FC 1994 (default)
DVD-RAM drive, FC 1993
A logical partition running a supported release of the Linux operating system requires a DVD
drive to provide a method to run the hardware diagnostics from the CD.
Description
POWER Hypervisor and Virtual I/O Server
Description
1024 MB (2 x 512 MB) DIMMS, 208-pin, 266 MHz DDR SDRAM
2048 MB (2 x 1024 MB) DIMMS, 208-pin, 266 MHz DDR SDRAM
4096 MB (2 x 2048 MB) DIMMS, 208-pin, 266 MHz DDR SDRAM
8192 MB (2 x 4096 MB) DIMMS, 208-pin, 266 MHz DDR SDRAM
Description
36.4 GB 15,000 rpm Ultra320 SCSI Disk Drive Assembly
73.4 GB 10,000 rpm Ultra320 SCSI Disk Drive Assembly
73.4 GB 15,000 rpm Ultra320 SCSI Disk Drive Assembly
146.8 GB 10,000 rpm Ultra320 SCSI Disk Drive Assembly
146.8 GB 15,000 rpm Ultra320 SCSI Disk Drive Assembly
300 GB 10,000 rpm Ultra320 SCSI Disk Drive Assembly
Chapter 1. General description
5
Advertisement
Table of Contents
