General information
The IBM
of microprocessor upgrade to a symmetric multiprocessing (SMP) server. It is
ideally suited for networking environments that require superior microprocessor
performance, efficient memory management, flexibility, and large amounts of
reliable data storage.
Performance, ease of use, reliability, and expansion capabilities were key
considerations during the design of the server. These design features make it
possible for you to customize the system hardware to meet your needs today,
while providing flexible expansion capabilities for the future.
The IBM Netfinity 7100 server comes with a three-year limited warranty and
90-Day IBM Start Up Support. If you have access to the World Wide Web, you can
obtain up-to-date information about the server model and other IBM server
products at the following World Wide Web address:
http://www.ibm.com/pc/us/netfinity/
Features and specifications
The following provides a summary of the features and specifications for the
Netfinity 7100 server.
v Microprocessor:
v Memory:
v Drives standard:
v Expansion bays:
v PCI expansion slots:
v Hot-swap power supplies:
v Cooling:
v Video:
© Copyright IBM Corp. 1999
®
®
Netfinity
7100 server is a high-performance server with the capability
®
®
– Intel
Pentium
III Xeon
– 32 KB of level-1 cache
– 512K of level-2 cache (min.)
– Expandable to four microprocessors
– Maximum: 16 GB
– Type: ECC, SDRAM, Registered DIMMs
– Slots: 4-way interleaved, 16 slots
– Diskette: 1.44 MB
– CD-ROM: 40X IDE
– Hot-swap: 10 slim high or 7 half high
– Non-hot-swap: Two 5.25-inch
– Four 33 MHz / 64-bit
– Two 66 MHz / 64-bit
250 W (115-230 V ac)
– Minimum: Two
– Maximum: Four
– Four hot-swap fan assemblies
– S3 video controller
™
3