Call Waiting Function; Calling A Number From Contacts; Adjusting Volume; Caller Id Function - Pantech Verse User Manual

CALL WAITING FUNCTION

If you are on a call and you receive another incoming call, you will hear a beep and the
caller' s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
To answer another call while on the phone, press the SEND Key
This places the first call on hold. To switch back to the first caller, press the SEND
Key again.

CALLING A NUMBER FROM CONTACTS

1. From idle mode, press the END/POWER Key
less than three seconds to unlock the keypad. Press the Right Soft Key
[Contacts].
2. Select the Contact entry and press the
phone number.
3. Press the SEND Key to place the call.
Selecting the Contact entry and then pressing the Send Key
Number of the Contact entry automatically.

ADJUSTING VOLUME

TO ADJUST THE MASTER VOLUME:
1. From idle mode, press the END/POWER Key
than three seconds to unlock the keypad. Press the Volume Keys / up or
down (located on the left side of the device).
2. Select one of the following options and press the
• All Sounds Off
• Alarm Only
• Vibrate Only
• Low / Medium Low / Medium /
32
.
, then press the Key in
Key [VIEW], then select the desired
will dial the Default
, then press the Key in less
Key [SET] to save it.
Medium High / High
Press the Volume Keys / up or down (located on the left side of the device) to adjust
Earpiece volume during a call.

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone rings. If the caller' s
identity is stored in Contacts, the name appears on the screen. The caller ID is stored in
the Call History menu.

VIBRATE MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate
Vibrate Mode:
1. Slide the phone up, then press and hold the Vibration Mode Key (#)
activate vibration mode.
2. To deactivate vibration mode, press and hold the Vibration Mode Key (#)

SPEAKERPHONE MODE

The Speakerphone feature lets you hear audio through the speaker and talk without
holding the phone.
To activate, press the END/POWER Key
three seconds to unlock the keypad. Press the Speakerphone Key
To deactivate, press the Speakerphone Key

USING AUTO KEYPAD LOCK FUNCTION

When the slide is closed the Side Keys and the Directional Key
them, press any key on the external display with the phone in the closed position
"Keypad Locked (Press END)" displays. "PRESS OK TO UNLOCK
displayed on the screen, then press the
to
, then press the Key in less than
.
again.
are locked. To unlock
KEYPAD" will be
Key to unlock the keypad.
01
02
03
04
05
06
07
.
33