Using A Microsd Tm Card; Before Using; Battery Handling Information - Pantech Verse User Manual

Correct
Correct
3. To remove the Wall Charger, gently pull the charger from
the device.
• When you charge the battery with the handset powered
off you will see a charging status screen. After the charging
has completed, the Charge Complete message appears. You
cannot operate the phone until it is powered on. To turn your
phone on, press and hold the END/POWER Key
display turns on.
• The battery is not fully charged at the time of purchase. Fully charge the battery
before use.
• It is more efficient to charge the battery with the handset powered off.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
18
Incorrect
Incorrect
until your
TM
USING A microSD CARD
TM
A microSD Card stores sounds, videos, images, photos, music, and other files.
CARD
TM
INSTALLING A microSD
To install your microSD TM Card:
1. Remove the cover of microSD Card Slot.
2. Press the microSD Card into the slot with the gold
contacts facing up.
3. Replace the cover of microSD Card Slot.
CARD
TM
REMOVING A microSD
TM
To remove the microSD Card:
1. Remove the cover of microSD Card Slot.
2. Gently push the exposed edge of the microSD Card
with your fingertip to release it from the slot.
3. Remove the microSD Card.
4. Replace the cover of microSD Card Slot.

BATTERY HANDLING INFORMATION

CAUTIONS: THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY IS USED.
DISPOSE OF USED BATTERY ACCORDING TO LOCAL LAWS.
DO'S
• Only use the battery and charger approved for use with the VERSE.
• Only use the battery for the system for which it is specified.
• Only use or replace the battery with a charging system or another battery that has been qualified with the
system per this standard, IEEE Std 1725-2006. Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
• Only use the battery for its original purpose. As an improper battery use may result in a fire, explosion or
other hazard.
• Try to keep batteries in a temperature between 36°F (0°C) and 95°F (35°C). If the battery is stored in
temperatures above or below the recommended range, give it time to warm up or cool down before using.
01
02
03
04
05
06
07
19