Brother MFC9700 Service Manual page 222

Selector
No.
1 Incoming mail server POP*
2 Incoming mail server SMTP*
3 Internet-FAX forward function
3
4 JBIG*
5 Alarm message when the corona
wire abnormally emits ions
6 Issue of a drum cleaning prompting
sheet when the corona wire
abnormally emits ions
7 Issue of a drum cleaning prompting
sheet when the specified number
of pages has been printed
8 Not used.
NOTE: Selectors 1 through 3 are applicable to those models equipped with LAN interface.
NOTE: Selectors 5 through 7 take effect only when selector 5 of WSW30 is set to "ON" (0).
Selector 3: Internet-FAX forward function
If this selector is set to "ON," the machine may forward a FAX message received through Internet to
other remote G3 facsimile equipment.
Selector 5: Alarm message when the corona wire abnormally emits ions
This selector determines whether or not the alarm message "PLS CLEAN DRUM" will appear on
the LCD when the corona wire abnormally emits ions.
Selector 6: Issue of drum cleaning prompting sheet when the corona wire abnormally emits ions
This selector determines whether or not a drum cleaning prompting sheet will be printed out when
the corona wire abnormally emits ions. The sheet prompts the user to clean the corona wire of the
laser-sensitive drum.
Selector 7: Issue of a drum cleaning prompting sheet when the specified number of pages has been
printed
This selector determines whether or not a drum cleaning prompting sheet will be printed out when
the specified number of pages has been printed (that is, when it is assumed that the corona wire
becomes dirty). The sheet prompts the user to clean the corona wire of the laser-sensitive drum.
WSW42 (Function setting 20)
Function
1
2
coding system
Setting and Specifications
0: OFF
0: OFF
0: OFF
0: Disabled
0: Enabled
0: Enabled
0: Enabled
1
* POP:
2
* SMTP: Simple Mail Transfer Protocol
3
* JBIG:
43
1: ON
1: ON
1: ON
1: Enabled
1: Disabled
1: Disabled
1: Disabled
Post Office Protocol
Joint Bi-level Image Group