Ncu Shield And Ncu Pcb - Brother MFC9700 Service Manual

1.21 NCU Shield and NCU PCB*

(1) Remove three screws from the NCU shield, then take off the NCU shield.
(2) USA version: Disconnect the main-NCU harness from the main PCB.
European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main
PCB. See the illustration given on the next page.
(3) Remove the screw from the NCU PCB and take out the PCB.
(*Provided on models supporting facsimile function.)
IV - 55