Brother MFC9700 Service Manual page 133

Multi-function center
Hide thumbs Also See for MFC9700:
Table of Contents

Advertisement

WSW No.
WSW38
WSW39
WSW40
WSW41
WSW42
WSW43
WSW44
WSW45
WSW46
WSW47
WSW48
WSW49
WSW50
n n n n
Operating Procedure
(1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode.
The machine displays the "WSW00" on the LCD and becomes ready to accept a firmware
switch number.
(2) Enter the desired number from the firmware switch numbers (01 through 50).
The following appears on the LCD:
(3) For machines w/ fax: Use the
be modified.
For machines w/o fax: Use the Reset key to move the cursor to the selector position to be
modified.
(4) Enter the desired number using the 0 and 1 keys.
(5) For machines w/ fax: Press the Set key.
For machines w/o fax: Press the Menu key.
This operation saves the newly entered selector values onto the EEPROM and readies the
machine for accepting a firmware switch number.
(6) Repeat steps (2) through (5) until the modification for the desired firmware switches is
completed.
(7) Press the Stop key to return the machine to the initial stage of the maintenance mode.
NOTES: • To cancel this operation and return the machine to the initial stage of the maintenance
• If there is a pause of more than one minute after a single-digit number is entered for
n n n n
Details of Firmware Switches
The details of the firmware switches are described in Appendix 2 in which the user-accessible
selectors of the firmware switches are shaded.
Firmware Switches (WSW01 through WSW50) Continued
Function setting 16
Function setting 17
Function setting 18
Function setting 19
Function setting 20
Function setting 21
Speeding up scanning-1
Speeding up scanning-2
Monitor of power ON/OFF state and parallel port kept at high
Delay of FAX line disconnection
Not used.
Not used.
Not used.
Selector 1
WSWXX = 0 0 0 0 0 0 0 0
mode during the above procedure, press the Stop key.
double-digit firmware switch numbers, the machine will automatically return to the
initial stage of the maintenance mode.
Function
Selector 8
and
keys to move the cursor to the selector position to
V - 11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc9800Dcp1400Mfc9760Mfc9860Mfc9880

Table of Contents