Disassembly Of The Control Panel Assy (Document Pressure Bar And Chute Cover Assy - Brother FAX560 Service Manual

1.2 Disassembly of the Control Panel ASSY
(Document pressure bar and chute cover ASSY)
(1) Place the control panel ASSY upside down.
(2) Pull either of the supports provided on the panel rear cover outwards and lift up the document
pressure bar. The three springs also come off.
(3) To replace the white film of the document pressure bar, remove it.
NOTE: Once removed, the white film will become unusable and a new one will have to be put
back in.
NOTE: When attaching a new white film to the document pressure bar, align the right and
rear edges as shown below.
IV - 7