System Requirements For Server & Client Applications - Brady LOCKOUT PRO 3.0 Administrator's Manual

System Requirements for Server & Client Applications
•
•
•
A-4 A LOCKOUT-PRO
•
DMINISTERING
•
•
LOCKOUT-PRO
Minimum:
DESKTOP CLIENT
Network Access to installation of LOCKOUT-
Connection PRO
intranet
Protocol TCP/IP
Operating System Windows 2000
Windows XP Professional
Printers Supported GlobalMark
HandiMark
only)
Sheet-fed laser or inkjet
Printer Drivers for the printer(s) you will use with LOCKOUT-PRO
should be installed. At least one printer must be installed to
run the application. See your printer's documentation for
information on installing your printer.
GlobalMark
uninstall the printer from your computer. Install the new
GlobalMark
installation CD. (NOTE: This driver has not been tested or
validated to work with MarkWare
other Brady software.)
SERVER
Processor 1.2 GHz or better
Memory (RAM) 512 MB
Disk Space 500 MB
Operating System Windows 2000 Advanced Server
Windows 2003 Server
Windows XP
IIS support V5 or v6, configured and enabled
ASP .NET V1.1, installed
REMOTE ADMINISTRATOR
Network Access to installation of LOCKOUT-
Connection PRO
intranet
Protocol TCP/IP
Operating System Windows 2000
Windows XP Professional
SYSTEM REQUIREMENTS FOR
Graphical Procedure Writing Software
TM
TM Enterprise Server over an
TM
TM (energy source labels
printers only: Updated driver is required. First,
TM
TM driver included on the LOCKOUT-PRO
TM Enterprise Server over an
LOCKOUT-PRO
Recommended:
Same
TM , Surf on Signs
2.6 GHz
1G
Same
Same
Same
TM
ENTERPRISE A
DMINISTRATOR
TM
TM
TM , or any
' G
S UIDE