Configuring The Fireface; Settings Dialog - General - RME Audio Fireface UC User Manual

16. Configuring the Fireface

16.1 Settings Dialog
Configuring the Fireface UC is done via its own settings dialog. Start the program Fireface USB
Settings. The mixer of the Fireface (TotalMix) can be configured by starting the program Fire-
face USB Mixer.
The Fireface's hardware offers a number of helpful, well thought-of practical functions and op-
tions which affect how the card operates - it can be configured to suit many different require-
ments. The following is available in the 'Settings' dialog:
• Level of analog I/Os
• Configuration of digital I/Os
• Synchronization behaviour
• Current sample rate
• State of input and output
Any changes performed in the
Settings dialog are
immediately - confirmation (e.g.
by exiting the dialog) is not
required.
However, settings should not be
changed during playback
record if it can be avoided, as this
can cause unwanted noises.
Use the drop down
Properties For to select the unit
to be configured.
On the right of it the current
firmware and driver version is
shown.
30
applied
or
menu
User's Guide Fireface UC © RME