Rimage 5400N Disc Copy Station User Manual page 17

Operating the Copy Station
Tip: Most of the fields are user-defined. However, the Rimage System
automatically defines some fields. The system-defined fields start with
RMG_ and display on the label. Text cannot be entered in these fields by the
user. System-defined fields include:
RMG_MasterOrCopy - Replaces the field with the word "Master" on
•
the first disc produced and "Copy" on subsequent discs if more that one
copy is made.
RMG_CurrentOfTotal - Replaces the field with the current number of
•
discs if the offload takes more than one disc per set. For example, the
Rimage spanned disc set.
RMG_DiscHash - Replaces the field with the MD5 hash value that is
•
calculated at runtime for verification purposes.
RMG_MediaType - Replaces the field with the type of optical media the
•
label is printing on.
5. Review and start the offload.
Next arrow on the Enter Label Text screen.
a. Select the
2001809_D
For more information visit rimage.com/support
The Review and Start screen displays
b. Select the type of optical media that the content will be copied to
from the Record on to: dropdown field.
c. Use to select the number of copies .
d. Select the Do MD5 Verification checkbox if you would like to use a
MD5 hash for verification. The hash value will print on the disc label.
Tip: A program that directly reads the disc image can be used to
validate the disc. Rimage recommends using ISOBuster for disc
verification.
14