Standard Ports; Parallel Port - Brady Bradyprinter THT 300X-Plus II Manual

Data Ports

Standard Ports

Standard Ports
The different ports available to connect the printer to your computer or network
include:
• Parallel
• Serial RS-232
• USB

Parallel Port

When communicating via the parallel port, the values selected must be the same as
those used by the host equipment connected to the printer. Port selection for status
information is determined by the channel sending the request. The parallel port can be
set for bidirectional or unidirectional communication. The default setting is
bidirectional.
A standard 36-pin parallel connector (as shown below) is available on the back of the
printer for connection to the data source.
56 Bradyprinter THT X-Plus II Series User Guide